What Does Reupholstery Cost in Frisco, TX?
If you’re staring at a sofa that survived toddlers, two dogs, and a move across town, you already know the furniture underneath that worn-out fabric is worth saving. The frame is solid. The cushions just need fresh fill. The fabric choice is dated. What you don’t know yet is what reupholstery will actually cost, and that’s what this article is here to explain.
The honest answer is that reupholstery pricing depends on four interrelated variables: frame condition, foam and fill grade, fabric choice, and the decorative detailing you select (or skip). We’ll walk through each one in plain terms so you can estimate your project before you ever call a shop. And when you’re ready for a real number, our Dallas upholstery service page covers what we do at our Carrollton workshop, the same shop that has been doing this work since 1980.
According to HomeGuide’s 2026 furniture reupholstery cost guide, national averages for reupholstery span a wide range because the category blends dining chair seat pads with large sectionals. Our shop’s pricing for full reupholstery in the DFW area generally falls in the $300 to $2,000 per piece range, depending on the piece type, fabric grade, and scope of work. Let’s break it down piece by piece so you have something concrete to work with.
Typical Reupholstery Costs for Frisco Homeowners
Before we get into the factors that move the price up or down, here are the approximate ranges we see most often. These figures cover labor only; fabric cost is additional and calculated separately based on yardage and material grade.
- Dining chair seat (slip cushion only): typically starts around $80–$150 per chair in labor, plus fabric, most dining sets need 4–6 chairs done at once for a consistent result
- Dining chair full reupholstery (seat + back): typically $150–$300 per chair in labor, depending on whether the back has a padded panel, channel work, or welt cord
- Club chair or armchair (full reupholstery): typically $700–$1,500 in labor depending on arm style, spring condition, and decorative details
- Sofa (full reupholstery, standard 3-seat): typically $1,500-$2,500 in labor depending on cushion count, arm profile, skirt, welt, and spring system
- Sectional: highly variable, configuration, number of pieces, and corner unit type all affect yardage and labor significantly; a photo quote is the only way to give you a reliable number
These are genuine starting points, not bait-and-switch minimums. A tighter dining chair with a simple foam pad and a mid-grade cotton-poly fabric will land on the lower end. A deep-seat Restoration Hardware-style sofa with eight individual cushions, contrast piping, and a designer linen will trend toward the upper end. The only binding quote is the one we provide after reviewing your photos, which you can request at no charge through our free online estimate form.
Factor 1: Frame Condition, The Foundation Everything Else Rests On
When a craftsman strips a piece down to bare frame for reupholstery, that’s when the real story emerges. Most homeowners are surprised to learn that a 1970s or 1980s sofa, bought new by their parents and passed along, often has a kiln-dried hardwood frame and eight-way hand-tied springs that put today’s mid-range new furniture to shame. That frame is worth restoring.
But a frame that has been stressed by years of use may need structural attention before fabric goes back on. Common repair items we encounter include:
- Re-gluing loose joints: joints that flex when you sit down eventually shear the fabric, catching them during reupholstery rather than after avoids a second round of work
- Dowel replacement on corner blocks and leg connections
- Spring re-tying: eight-way hand-tied springs that have loosened or snapped need re-tying to restore even support; sinuous-spring (S-spring) systems are re-tensioned or replaced
- Webbing replacement under cushions, old jute webbing that has stretched or torn transfers stress unevenly to the fabric above it
Frame repairs are quoted separately from the reupholstery labor because the scope varies piece to piece. A client whose club chair is still structurally solid pays only for fabric and upholstery work. A chair where three corner blocks have separated needs those addressed first, think of it as the difference between painting a wall and painting a wall that first needs patching. The repair investment extends the finished piece’s life by years. You can learn more about the full range of structural work we handle on our Dallas furniture repair page.
Factor 2: Foam Grade and Cushion Fill, What You Sit On Matters
The cushion interior is the part most homeowners think about least and feel the consequences of most. Old foam compresses over time, that “sunken” feeling in your sofa isn’t a frame problem, it’s usually foam that has lost its resilience. When we reupholster a piece, we assess whether the existing fill can be reused, freshened with a dacron wrap, or needs full replacement.
According to Sailrite’s upholstery foam selection guide the density and ILD (indentation load deflection) of foam determine both comfort feel and how long a cushion maintains its shape under daily use. High-density foam (2.5 lb/ft³ or above) in seat cushions can last 15 years or more; lower-density poly foam may show significant compression within two to three years.
The fill options range from straightforward to luxurious:
- Standard polyurethane foam (HD36 grade): durable, cost-effective, appropriate for everyday use, good baseline choice for family rooms with kids and pets
- Foam with dacron wrap: a layer of polyester fiber bonded around the foam core gives cushions a slightly rounded, plush appearance without sacrificing support, the most common upgrade we recommend
- Luxury high-resilience foam (Lux grade): firmer base with superior recovery, rated for 16-plus years of use, ideal for a quality piece you intend to keep long-term
- Down-feather blend (sofa back cushions): premium softness with a lived-in look; an upcharge that some clients specifically request for the relaxed aesthetic
Cushion fill replacement is handled through our cushion and foam replacement service which can also be done as a standalone job if your frame and fabric are still in good shape but your seat comfort has declined.
Factor 3: Fabric Grade and Yardage, Where Most of the Price Variation Lives
Fabric is where the reupholstery math gets interesting, and where you have the most choices. The cost equation has two components: yardage (how much fabric your piece requires) and grade (what that fabric costs per yard).
Yardage: How Much Fabric Does Your Piece Need?
According to Revolution Fabrics’ upholstery yardage guide a standard three-seat sofa typically requires 14–18 yards of fabric, while a club chair or armchair uses 5–7 yards. Dining chair seats run about 1–2 yards per chair. These are baseline figures for solid fabrics; patterns that require matching at seams add 10–15% to account for repeat alignment.
The decorative choices you make also affect yardage. A sofa with a plain straight-cut skirt uses less fabric than one with a box-pleated or gathered skirt. Welt cord runs along every seam edge, so a complex profile with multiple cord lines adds yardage. Tufting, channel work, and contrast piping each require additional fabric beyond the core yardage calculation.
Fabric Grade: From Cotton-Poly Blends to Designer Performance Fabrics
At our Carrollton workshop, we keep swatch books on hand so you can come in and look through the samples in person; once you pick a fabric we order it in (typically about a week to arrive). We also welcome customer-supplied fabric (COM), with a $35 per yard fee on top of the labor quote, for clients who have found a designer textile they love from another source. Our swatch book selection covers what we currently carry.
Here is a general grade framework to help you set expectations:
- Cotton-poly blends (entry-grade upholstery): wide color selection, lower cost per yard, good for pieces that see moderate use or are in secondary rooms
- Performance fabrics (Crypton, Revolution, Sunbrella indoor): engineered for high-traffic use, moisture-resistant, excellent for families with young children and pets, mid to upper-mid price range
- Designer linen and linen blends: elegant texture and drape; best suited for lower-traffic pieces or formal rooms, upper-mid price range
- Performance velvet: the look of traditional velvet with better durability, a popular choice right now for accent chairs and headboards; upper-mid to premium
- Sunbrella indoor-outdoor fabric: an increasingly popular choice for households with covered patios who want the same sofa fabric to work in both spaces
Factor 4: Decorative Detailing, What Adds Labor Cost
Two sofas of identical size can have very different labor costs depending on what the client specifies for finishing details. These are not upsells, they are design choices that require additional time at the workbench:
- Single welt cord: the standard cord running along seam edges, minimal added labor, clean professional finish
- Double welt: a doubled cord for a more substantial border look, additional material and stitching time
- Contrast piping: a different fabric for the welt than the main body, requires matching, cutting, and bias-wrapping a second fabric; adds time and material
- Skirts (plain, box-pleat, gathered): any skirt adds yardage and labor; box-pleat is more labor-intensive than a plain knife-edge skirt
- Button tufting: the grid-pattern dimpled finish seen on headboards and formal chairs, each button requires hand-pulling through the foam and frame; significant added labor on large pieces
- Channel work: vertical or horizontal sewn channels, decorative and structural; adds cutting precision and stitching time
- Decorative nail heads: individually set by hand along exposed wood rails; adds time proportional to the linear footage
The simplest rule: clean, simple designs cost less. If your goal is a refreshed look on a good frame with a quality fabric but straightforward construction, reupholstery is often far more affordable than clients expect going in.
Customer-Supplied Fabric vs. Our In-House Inventory
We work both ways without any friction. If you have found a fabric you love, through a designer, a fabric house, or a retailer, you can supply it directly (called COM, or Customer’s Own Material). We quote labor assuming COM and you handle the fabric sourcing separately.
If you prefer to choose from what we carry in the workshop, you’re welcome to drive to our Carrollton location and look at actual samples under workshop lighting rather than making a decision from a small square on a website. Seeing the texture of a performance velvet in person versus on a screen makes a real difference in confidence. Our in-house inventory skews toward practical, well-curated options at sensible price points, not a warehouse of thousands of books.
One important note for COM projects: we charge a $35 per yard fee on top of the labor quote when the customer supplies the fabric. We also cannot be responsible for fabric that arrives insufficient in yardage, defective, or that does not perform as expected. We’ll tell you upfront how many yards your piece requires; ordering that amount plus 10-15% for patterned fabrics is the standard professional recommendation.
Pickup and Delivery for Frisco Residents
We offer DFW-wide pickup and delivery for a flat fee based on distance. From most northern suburbs the drive to our Carrollton workshop runs roughly 25 minutes via the Dallas North Tollway. For most furniture pieces, a two-person crew handles loading and unloading safely, you don’t need to rent a truck or worry about damaging the piece in transit.
Homeowners with large sectionals or multiple dining chairs often find the pickup and delivery option worth every dollar. Coordinating one drop-off and one pickup is far simpler than making multiple trips with a borrowed trailer. Pickup and delivery pricing is confirmed at estimate time so there are no surprises on the invoice.
Reupholster vs. Replace: The Math for DFW Homeowners
The question we hear constantly is: “Should I just buy a new sofa?” It’s a fair question, and the honest answer depends on what you’re comparing. According to Angi’s reupholstery cost and value analysis quality reupholstered furniture regularly outlasts new mid-range sofas by a significant margin, a piece with a hardwood frame and eight-way hand-tied springs, properly reupholstered with quality foam and fabric, can last 15 or more years.
New furniture at the price points most often compared to reupholstery, the $800 to $2,000 sofa category, typically uses engineered wood frames, sinuous springs, and low-density foam that compresses noticeably within three to five years. If you are comparing reupholstery cost to a mid-range big-box sofa, you are often comparing a 15-year piece to a 5-year piece. Stretched over time, the reupholstered piece usually wins on total cost of ownership.
The math flips when the piece you are considering reupholstering has a particleboard frame, staple-and-glue construction, or is a mass-market piece with no sentimental or design value. We are happy to tell you honestly, from photos, whether your specific piece is worth reupholstering, that assessment is part of the free online estimate process, not an additional service.
Why Frisco Clients Specifically Come to Andrew’s
Frisco has grown into one of the most affluent communities in the metroplex, and with that growth has come a housing stock full of well-made furniture that deserves better than being sold for pennies at a moving sale or discarded when the fabric wears out. Young families who bought quality sofas five or six years ago find themselves with frames that are still structurally sound but fabric that reflects the reality of two kids and a golden retriever. The solution isn’t a new sofa, it’s a performance fabric reupholstery that gets another decade out of the frame they already own.
Aesthetic preferences in newer neighborhoods lean toward clean lines with textural interest rather than traditional frilly detailing. Performance velvets, tight-arm profiles, and minimal welt cord are common requests. That’s exactly the kind of work our Carrollton shop does well: clean, refined, and built to last.
We have handled reupholstery projects across the area for years, and the conversations always start the same way, the client knows their furniture is good, they just need someone to confirm it and give them a real number. That’s what the free online estimate is designed to do.
Serving Frisco and Surrounding DFW Communities
Our Carrollton workshop serves Frisco homeowners along with clients throughout the Dallas-Fort Worth metroplex. In addition to Frisco, we regularly work with customers from Plano, McKinney, Allen, The Colony, Little Elm, Prosper, and Celina to the north, as well as Dallas, Richardson, Garland, Irving, and Lewisville across the broader DFW area. If you are in the DFW metroplex and have a piece worth saving, we can reach you. Pickup and delivery pricing is distance-based and confirmed in your estimate.
Get a Real Reupholstery Number for Your Piece
The ranges in this article are the honest starting points we give clients before we see photos. The actual number for your specific piece depends on exactly what we find when we assess frame condition, measure for yardage, and discuss your fabric preferences. Every quote we provide is free and based on photos you submit, no obligation, no pressure, no surprises.
You can request a free online estimate by uploading photos of your piece through our website. If you prefer to speak with someone directly, call us at 214-731-3060. We have been doing this work for 45 years from our Carrollton workshop, the conversation will be straightforward and honest.
Frequently Asked Questions: Reupholstery Costs in Frisco, TX
How much does sofa reupholstery cost in Frisco, TX?
A standard three-seat sofa reupholstery typically starts around $1,500 to $2,500 in labor, plus fabric cost calculated by yardage and material grade. A sofa in good structural condition using a mid-grade performance fabric will land in the middle of that range. A deep-seat sofa with eight cushions, decorative detailing, and designer fabric will trend higher. The only way to get a firm number is through a photo-based quote, which we provide at no charge.
What does it cost to reupholster dining chairs in Frisco?
Dining chair seat reupholstery typically starts around $80–$150 per chair in labor for a slip cushion, plus fabric. Full reupholstery covering seat and padded back runs $150–$300 per chair depending on construction. Most clients do full sets of four to six chairs at once to ensure consistent fabric color and texture across the set.
Can I supply my own fabric for reupholstery in Frisco?
Yes, we work with customer-supplied fabric (COM) regularly. We quote labor assuming you provide the material, and we tell you exactly how many yards your piece requires. For patterned fabrics, add 10–15% for pattern matching. You’re also welcome to look through our swatch books at the Carrollton workshop in person, then we order the chosen fabric in (typically about a week to arrive).
Do you pick up furniture in Frisco, TX?
Yes. We offer DFW-wide pickup and delivery for a flat fee confirmed at estimate time. Our Carrollton workshop is approximately 25 minutes away. Most pieces are handled by a two-person crew so you don’t need to manage transport yourself. Pickup and delivery pricing is included in your estimate upfront.
How long does reupholstery take from Frisco?
Most reupholstery projects at our Carrollton workshop take six to eight weeks from drop-off to completion, depending on current queue, fabric availability (particularly for COM orders waiting on material to arrive), and project complexity. Large or complex pieces, sectionals, tufted headboards, full dining sets, can take longer. We give you a realistic timeline at the time of booking, not an optimistic one that slips.
Is reupholstery worth it in Frisco compared to buying new furniture?
For pieces with solid hardwood frames and quality spring systems, reupholstery almost always makes sense, especially when compared to new furniture at the same perceived price point. A well-made sofa from the 1980s or 1990s, reupholstered with high-density foam and a quality fabric, will typically outlast a new mid-range sofa bought today. We’ll tell you honestly from photos whether your specific piece is worth the investment before you commit to anything.